DIY: Cuff Bracelets from Bangles (3 Types)

header-resizedWhat happens when you have bangles and beads lying unused around your house? You make cuff bracelets! And de-clutter at the same time. And end up with some cool new arm candy.

Cuff bracelets are cool. Cuff bracelets from bangles? Cooler ūüėõ

These cuff bracelets are great because they are simple, customizable, and best of all‚ÄĒadjustable without any annoying lobster clasps.



  • Bangles (Thin enough to be cut with cutting pliers and bent; thick enough to stay in¬†bent shape)
  • Beads (with holes big enough to thread through your bangles)
  • Small piece of linked chain (about 1 inch in length)
  • Cutting pliers
  • Glue (depending on where you live, get a strong glue that can stick metal to metal. Please make sure to follow the instructions of your glue of choice)
  • Optional – Clothes pins for drying your cuffs (yup. you’ll see)


1. Subtle Spiral



ONE. Using your pliers, carefully cut your bangle at one point.

TWO. Pull the two ends apart from each other as shown, so they move to the opposite directions. The distance between the ends really depends on you.

THREE.¬†Thread one bead into one end. Holding¬†the bead right at the end so the edge of the bangle doesn’t jut out, glue the bead in place. Make sure you apply glue onto both holes of the bead.

FOUR.¬†Repeat step three with the other matching bead. Keep aside to dry by hanging it from a clothesline (or any line)¬†using a clothespin, and you’re done!

2. Spaced Out



ONE. Cut off a portion of your bangle (about a quarter of the whole length. Your choice) with pliers.

TWO & THREE. Bead in one bead into one end of the bangle and glue in place. Repeat with your matching bead on the other end. Again, make sure to apply glue onto both holes of each of your beads to make them more secure!

FOUR. Set aside to dry before wearing,

3. Bangle & chain



ONE. Cut your bangle at a single point.

TWO.¬†Pull apart the ends in opposite directions till there’s about one inch of space between them.

THREE.¬†Take your chain and thread in the first link into one end of your bangle. Keeping it just at the edge of the bangle, hold it¬†in place so it doesn’t slide off. Now with a generous amount of glue, glue it into place. Set it aside till it is completely dry.

FOUR.¬†Once dry, take the chain and pull it so it’s nice and straight. While still pulling, loop it through the other end of the bangle with whichever link hole ( i dunno what to call them) is closest.

After beading it in, the chain should still have tension and stay nice and tight. Cut off the excess chain with pliers.

Now you can glue this end as well and then let it dry. Voila!

Be careful not to press¬†the ends of the bangle back in or you’ll lose this tension! Even while putting the bracelet on or taking it off you need to keep this in mind if you still want the tension. Cuz you can’t get it back once it’s glued!



Guys I hoped you enjoyed this simple¬†tutorial and will try it out for yourselves! I had fun making these and ended up making a few more (or maybe it’s cause I had too many bangles and beads lying around my room?) Remember to tag me on instagram if you make any!


Namrata. ♥


DIY: No-Sew Kimono Cover-Ups (4 Styles)

DIY No-sew kimono cover-upThe “kimono” or the kimono-inspired cover-up (’cause cummon. we all know they’re not real kimonos. The Japanese should take their credit) is such a popular trend these days, and I’ll admit, I’m a fan of it.

You can throw it over almost anything, from the typical bustier and cutoffs, to dresses and maxi skirts, and look just fab. This jacket-cardigan-cape thing can be worn to fit different styles as well, from sophisticated chic to laid back boho. I personally prefer the latter.

I know they come in all types of cuts and sizes, and today I’m gonna share 4 of my ways to get this trend… without sewing!


  • Chiffon cloth (about 33″ in length and 13″ in breadth. You could also use a dupatta if you have one! That’s what I did)
  • Scissors
  • Measuring tape





One. Fold the fabric in half lengthwise.

Two. Tie the meeting corners into a double knot.

Three. Wear! Your hands go into the two holes created after tying.

DIY no-sew kimono cover-up


2.DIY no-sew kimono cover-up


One. Fold in lengthwise so the top layer ends at about the 2/3rd (imaginary) line.

Two.¬†Tie the two top-layer¬†corners to the edge of the bottom layer at the point where they meet. Make sure to tie¬†small and secure double knots so it’s not bulky.

Three.¬†Wear! You’ll get a nice drapey effect and some extra fabric hanging under each arm, which I love.

DIY no-sew kimono cover-up


3. DIY no-sew kimono cover-up


One. Lay your fabric flat on the ground and fold in half lengthwise.

Two. Using your measuring tape, find the centre of the length.

Three. Attach a pin to mark the centre. Repeat this a few times so you get a few pins creating a line down the middle of your fabric.

Four. Cut the front flap, I repeat, the front flap only! Start from the bottom and cut a straight line using the pins as your guide. Stop cutting when you reach the fold.

Five. Tie the two bottom left corners that meet into a secure double knot.

Six. Repeat on the other side with the bottom right corners.

Seven.¬†Wear!! (wow, I’m really getting excited)

DIY no-sew kimono cover-up


4. DIY no-sew kimono cover-up


One. Fold your fabric in half lengthwise and then cut a slit up the middle of your front layer only (as shown).

Two. Lift the two front portions (like in the picture above) till the outer two corners of the front layer are at about the half point of the bottom layer.

Three. Tie the two outer corners of the front layer to the edge of the back layer.

Four.¬†Wear! ūüôā

DIY no-sew kimono cover-up


Easy ways right?They’re great for when you’re in a kimono emergency and need one asap. Kinda like quick fixes. You’re welcome.

Hope you enjoyed, guys!

Please tag me in your recreations on Instagram! Would love to see them. My insta icon in on the right sidebar of this page. Have fun!

Namrata. ♥

DIY: 90’s Halter Crop Top (From a Tank Top)

DIY halter crop top sewing

I first came across this top on the Forever 21 website and fell in love. It’s so simple yet so basic and versatile that I think it can almost pass as an essential. What I love the most is the halter neckline, and who doesn’t love a 90’s vibe?¬†I’ve been seeing this top everywhere lately. Other brands sell their own versions of it too.

You can definitely make this top from scratch, but if you’d rather make it out of an old tank to skip the start-from-scratch process, then I made this post for you. It’s also a good way to give¬†back life to an old boring tank that you perhaps don’t wear anymore. I hope the trend sticks around for a while since I just finished making my own! Haha.

Let me say that this project¬†might take some time, but it’s totally worth it. Now that I’ve said what I wanted to say, let’s get into the tutorial!


  • Well fitted tank top/ camisole (doesn’t matter if it is single strapped or wider like mine. As long as it has border hemming that can serve as the strings to tie behind¬†your neck‚ÄĒsee step 1‚ÄĒyou’re good)
  • Scissors
  • Chalk for marking
  • Measuring tape
  • Sewing materials: sewing machine/ needle, thread


I don't know how the white chalk mark vanished in the second part of the picture. Weird. The first two parts are the same thing, just showing before and after, so don't get confused!

I don’t know how the white chalk mark vanished in the second part of the picture. Weird. The first two parts are the same thing, just showing before and after, so don’t get confused!

‚φ¬†To create a neckline that is 5 to 6 inches wide:¬†Find the centre of your neckline by folding the top lengthwise in half and marking with a chalk. Unfold then measure about 2.5 to 3 inches from the centre mark towards either side and mark.

You could hold up the neckline right under your neck to see if you’re happy with how wide your new neckline will be and adjust accordingly.

‚Ď° Now to create the two strings for tying: You¬†will need to separate the hemming from the rest of the tank, except inside the 5 to 6 inch mark portion (see image above). To do this you should cut as close to the hem as possible. Do this slowly and be careful not to cut the hem itself.

Once the separating is done, snip the hem in half at the back to create your two strings. The length of your strings you get will depend on what type of top you’re using.

A low-necked or low-backed tank (like mine) would be perfect. This gives you more hemming and therefore longer¬†string.¬†And if you’re using a top that has a single strap, then it makes things easier for you since you would need to do less separating.


step 2-w-compressed

TWO.¬†Wear your unfinished top and tie the strings behind making sure the neckline is high. Then¬†on one side, fold the excess fabric inwards to get an angled folded line. Adjust till you’re happy with the angle and then pin into place.

Remove the top and fold lengthwise in half. Keeping the pinned side facing up, align both sides of the top. This is to get the exact angle on the other side as well. Trace out the angled border with your chalk; fold and pin the other side too in the same way.

Now you’ll need to cut off the excess fabric leaving about 1/2 an inch of seam allowance along the angled sides, and…


step3-w DIY halter crop top

THREE.¬†…while you’re at it, you could continue and cut a straight line across the back. So by continuing, you are creating seam allowance for the back as well. To hem all these borders, fold in twice and sew.

I’m sorry if the picture above is confusing. That’s because I cut and hemmed the angled edges and the back separately. You could do it whatever way works for you!


step 4-w-compressed

FOUR.¬†We’re almost there! Wear your top and mark where you want the bottom to end. I let mine end a teeny bit above my belly button.

Remove the top and fold lengthwise in half (yet again) then draw a straight line 1/2 an inch (seam allowance) below the chalk mark created. Cut along the line and then hem.


step 5-w-compressed

FIVE.¬†This step is only for those whose tops don’t hug the waist well. All you need to do is turn your top inside out, mark slanting lines,¬†sew along them and cut off the excess.

And with that you have yourself a cute transformed crop top!


I hope this tutorial was easy to follow and understand. I feel like I complicated a few parts (eek!).¬†But if in doubt, there’s always the comment section below.

Please don’t forget to tag me on your Instagram pictures if you do recreate this! I would love to see them. My Instagram icon is on the right sidebar.

All the best!

‚ô• Namrata.

DIY: Boxy Crop Top From an Oversized Tee

DIY boxy crop top

I’m entering DIY clothing territory with this post, eek! I’ve been obsessed with making my own clothes and revamping old ones these days (my room is a mess now). It’s just too fun and also¬†helpful when you’re on a tight budget.

I also love the idea of giving new life to old/ ill-fitting pieces. And who wouldn’t love showing off clothes they made themselves. Haha.

This project is really simple and¬†requires only basic sewing skills. I hand sewed mine since my sewing machine is out of order, and it still didn’t take me too long.

I’ve mentioned plain tee in the materials below but I’ve used one with some (ugly) graphic in the front since that’s what I had at hand. Luckily there was just enough plain fabric below the graphic to make my top with. Phew.


  • Oversized plain jersey/ stretchy tee of your choice.¬†Make sure it’s not so big that another you can fit into it too. It should maybe be¬†1 to 2 sizes bigger than your actual size. I’m a S/ XS size and I used a men’s M size for this project. But if all you have is a tee too big, you can always make it smaller (as shown in step 8)
  • Scissors
  • Chalk (or anything to mark on your tee with, which you’re sure can be washed off. Since I was working on a white tee and couldn’t use white chalk,‚ÄĒduh‚ÄĒI used a regular pencil and it worked just fine!)
  • Tailor’s measuring tape
  • Long solid ruler
  • Thread, the same colour as your tee


ONE. Stand straight in front of a mirror and with a measuring tape, measure from your shoulder down to the length you want your crop top to be. I measured till my belly button.


DIY boxy crop top

TWO. Lay out your tee on a flat surface and smooth out all the folds. Starting from the bottom hem and going upwards with the measuring tape, mark the length you just measured on yourself.

You could mark this length a few more times across the breadth of the tee so that when you join the dots, you get a straight line parallel to the bottom hem. Cut along the straight line neatly. Just make sure both the front and back are aligned properly before cutting. You will only be using the bottom portion of the tee for this project.


DIY boxy crop top

THREE. For the armholes, you can use a top you own as a guide. Mark the length of the armhole and neatly cut the side folds/ seams up to the marks. You can cut and throw away the inside seam extra bit to make it neat.


DIY boxy crop top

FOUR. To create the neckline, you can either use a top with a high neckline as a guide, or do it manually by measuring and cutting (which I did. I measured 4 inches which gave me an 8 inch wide neck hole). Either way, you will first need to fold the fabric in half breadth wise, so the sides of the tee meet.

If you’re using a top as a guide, fold it in the same way (so the neckline is seen and not folded inwards), align it on top of your tee, and mark out the curve of the neckline.

Wait! Don’t start cutting yet. You need to take out the back part¬†of the tee from the fold so that you don’t get a neckline at the back too (unless you want that). Keeping the front part folded, cut along your marked neckline.


DIY boxy crop top

FIVE. Cut out the back of the neck by folding the back in half again, but a little higher than the front.


DIY boxy crop top

SIX.¬†Flip the fabric inside out and stitch the top two shoulder sections together. I folded the edges once before sewing to make them more secure, but you don’t have to.


DIY boxy crop top

SEVEN. Next, tug at the raw borders (neckline, arm holes) so it stretches and rolls over itself.

EIGHT. You can now try on your new top! Look in the mirror and see how you like the fit.

If you feel the neckline is too high, you can mark how much lower you want it to be and cut. Just remember that once it’s cut, you can’t go back. Also, I think¬†this top in particular would look better when the neckline is a bit high since it would add to the “boxiness”.

Also, check and see if you like how the top falls on you from all angles. I found mine to be a little too wide that it¬†flared out from the back a little too much for my taste. If you like the effect… then you’re done! You don’t have to read the next step.


DIY boxy crop top

NINE. For those who want to make the top a little more fitted, all you need to do is stitch the sides.

Pinch at the sides while wearing it to get an idea as to¬†how much you want gone, attach a pin or mark with your marker and then remove your top. With the tee inside out, flatten it out, draw straight lines (yes, straight) that go through the mark you created, and sew. I used a long solid ruler which helped me get really straight lines. ‘Cause I’m a perfectionist like that.

I sewed about 1 inch in. Just make sure your line curves as it reaches your armpit section, as shown in the picture below. Once sewn, you can cut off the excess fabric.

I’m loving my new top and I’m happy with how it fits. It’s such a basic and simple crop top. You can see the result below.

Psst. The pictures below are ready for pinning on Pinterest if you want to (the Pinterest button is below this post).

If you decide to make this then please share pictures of yours on Instagram and tag me in them. Would love to see them! My Instagram icon is on the right sidebar of this page.  Hope you liked this DIY guys!

DIY white boxy crop top

DIY boxy crop top


Simple Pearl Necklace Tutorial

DIY pearl necklace


This is my first blog post ever (excitement) and I’m glad it’s a DIY!¬†I came up with this simple DIY necklace that I think anybody can easily create. It’s pretty, versatile, and only takes about ten minutes to make.

Funny that I’m doing this post since I’m not really a big fan of pearls and I’ve always shied away from them. They’re just not really my style. But I’ll admit, they do look good when worn right.

Onto the tutorial…



  • Pearl chain – about¬†14¬†inches in length. If you don’t have one, you can bead in pearls onto string and create your own. I’ve realised that it’s better to use one with lil spaces between each pearl. This makes it easier to style later, and generally better looking. If you’re making your own, you can create one or two knots after beading each bead to get that space.
  • Two strips of black satin ribbon – Each strip should be about 22 to 24 inches in length. Cut one strip and use it as a guide for cutting the second. Keep in mind that¬†you’ll have to have a little extra so you are able to easily tie a bow/knot without losing length in your necklace. So don’t worry if you’ve cut too much. You can always trim off any excess later.
  • Fabric glue (forgot to include this in the¬†picture above).

Important: I have chosen these measurements for my necklace, but you can definitely use your own measurements. You can use more pearl chain or ribbon and make the necklace whatever length you want it to be.

For my necklace, I actually used a little too less ribbon, so it turned out to be more of a choker. But I still like it. So the lesson learned is: Do not forget to leave extra ribbon length so you can tie off your necklace easily! (I kinda found it hard to tie mine).


One. Get your pearl chain (which is already connected/tied at the ends to create a circle) and one ribbon strip. Loop the ribbon through the pearl necklace.

Two. Repeat with the second ribbon on the opposite side of the pearl chain.

Three.¬†Now you can carefully lift the necklace and place it around your neck to check the length. Once you’re happy with your desired length, you can go ahead and stick the ribbon together near the pearl as shown above. This is to make sure the ribbon doesn’t slide off. But, if you’re not happy with the length:

‚Ästyou can either snip off some ribbon if you want the necklace shorter (duh), or

‚Äď do this trick if you want more length even after cutting (that’s right, there’s¬†hope even after cutting ribbon strips that are too short!) : On one side, pull the ribbon end as if you were removing it. This is obviously going to make the ribbon ends of the same strip uneven. Keep pulling¬†till you’ve got the length you want. Glue the ribbon together where the short end touches the parallel side to keep it in place (I hope I didn’t make this simple step sound complicated).

Four.¬†You’re done! Wasn’t that easy? You can now try out your new necklace. When you wear it, be sure to tie a secure knot/bow that’s also easy to unravel. Also, dab on a bit of clear nail polish to the ribbons’ four ends, ’cause¬†you don’t want that unravelling! (There’s a mistake in one of the pictures above showing the steps . Let me know in the comments if you found it :P)

I found four ways you can wear this necklace:

pearl collage-w

  1. Parallel layers ‚ÄstAdjust the pearl chain after¬†wearing it (by sliding it around the ribbon loop you created) to make the layers parallel to each other.
  2. Crescent¬†‚Äď Adjust so the bottom¬†layer is a little longer than the top one to create that crescent shape.
  3. Peter-pan collar¬†‚Äď Before wearing, twist the necklace once. Adjust so you get a nice peter-pan collar. If you want this to stay in place, you will have to dab some fabric glue (or whatever works) between the pearl beads that meet at the centre. And then you’ll have a permanent peter-pan collar look, I must warn you.
  4. Twisted¬†‚Äď Get this look by simply twisting the whole necklace a few times before wearing it.

I think this necklace will help¬†add a bit of dressiness to any outfit. Here’s me styling it with a plain old denim shirt: DIY pearl necklace

Please let me know if you liked this DIY in the comments below!

‚ô• Namrata.